CYLINDER HEAD. 2010 Lexus IS 250C Convertible M/T

4GRFSE..GSE20

4GRFSE..GSE20

4GRFSE..GSE20

4GRFSE..GSE20
2GRFSE..GSE21

2GRFSE,4GRFSE..GSE2#

2GRFSE,4GRFSE..GSE2#
FOR CYLINDER HEAD SET SUB; FOR HEAD TO CAMSHAFT BEARING CAP.

4GRFSE..GSE20

2GRFSE,4GRFSE..GSE2#

2GRFSE,4GRFSE..GSE2#
FOR CAMSHAFT HOUSING TO CYLINDER HEAD, LEFT; FOR CAMSHAFT HOUSING TO CYLINDER HEAD, RIGHT.

4GRFSE..GSE20

2GRFSE,4GRFSE..GSE2#
FOR CAMSHAFT HOUSING TO CYLINDER HEAD, LEFT; FOR CAMSHAFT HOUSING TO CYLINDER HEAD, RIGHT.

4GRFSE..GSE20

4GRFSE..GSE20

2GRFSE,4GRFSE..GSE2#
WITH HEAD STRAIGHT SCREW, LEFT NO. 1; WITH HEAD STRAIGHT SCREW, NO. 1; WITH HEAD STRAIGHT SCREW, RIGHT NO. 1.

2GRFSE,4GRFSE..GSE2#
FOR OIL PAN DRAIN; WITH HEAD STRAIGHT SCREW, LEFT NO. 2; WITH HEAD STRAIGHT SCREW, NO. 1; WITH HEAD STRAIGHT SCREW, NO. 2; WITH HEAD STRAIGHT SCREW, NO. 3; WITH HEAD STRAIGHT SCREW, RIGHT NO. 2.

2GRFSE,4GRFSE..GSE2#
FOR CYLINDER HEAD; FOR CYLINDER HEAD SCREW PLUG; FOR CYLINDER HEAD SCREW PLUG NO. 2; FOR OIL COOLER PIPE UNION BOLT; FOR OIL PAN DRAIN PLUG; FOR WATER HOLE; FOR WATER HOLE LEFT; FOR WATER HOLE NO. 2; FOR WATER HOLE RIGHT; FOR WATER INLET HOUSING; STRAIGHT SCREW PLUG NO. 2(FOR CYLINDER BLOCK); STRAIGHT SCREW PLUG NO. 3(FOR CYLINDER BLOCK); WITH HEAD STRAIGHT SCREW PLUG.

2GRFSE,4GRFSE..GSE2#
FOR CYLINDER HEAD SCREW PLUG; FOR CYLINDER HEAD SCREW PLUG NO. 2; FOR CYLINDER HEAD SCREW PLUG, LEFT NO. 1; FOR CYLINDER HEAD SCREW PLUG, RIGHT NO. 1; FOR OIL PAN DRAIN PLUG; FOR OIL PUMP OUTLET PIPE; FOR WATER HOLE.

2GRFSE,4GRFSE..GSE2#
WITH HEAD STRAIGHT SCREW, LEFT NO. 1; WITH HEAD STRAIGHT SCREW, NO. 1; WITH HEAD STRAIGHT SCREW, RIGHT NO. 1.

2GRFSE,4GRFSE..GSE2#
FOR OIL PAN DRAIN; WITH HEAD STRAIGHT SCREW, LEFT NO. 2; WITH HEAD STRAIGHT SCREW, NO. 1; WITH HEAD STRAIGHT SCREW, NO. 2; WITH HEAD STRAIGHT SCREW, NO. 3; WITH HEAD STRAIGHT SCREW, RIGHT NO. 2.

2GRFSE,4GRFSE..GSE2#
FOR CYLINDER HEAD; FOR CYLINDER HEAD SCREW PLUG; FOR CYLINDER HEAD SCREW PLUG NO. 2; FOR OIL COOLER PIPE UNION BOLT; FOR OIL PAN DRAIN PLUG; FOR WATER HOLE; FOR WATER HOLE LEFT; FOR WATER HOLE NO. 2; FOR WATER HOLE RIGHT; FOR WATER INLET HOUSING; STRAIGHT SCREW PLUG NO. 2(FOR CYLINDER BLOCK); STRAIGHT SCREW PLUG NO. 3(FOR CYLINDER BLOCK); WITH HEAD STRAIGHT SCREW PLUG.

2GRFSE,4GRFSE..GSE2#
FOR CYLINDER HEAD SCREW PLUG; FOR CYLINDER HEAD SCREW PLUG NO. 2; FOR CYLINDER HEAD SCREW PLUG, LEFT NO. 1; FOR CYLINDER HEAD SCREW PLUG, RIGHT NO. 1; FOR OIL PAN DRAIN PLUG; FOR OIL PUMP OUTLET PIPE; FOR WATER HOLE.

2GRFSE,4GRFSE..GSE2#
L=13.8,OD=5.0
RING WITH HEAD; STRAIGHT; STRAIGHT(FOR CAMSHAFT HOUSING LEFT); STRAIGHT(FOR CAMSHAFT HOUSING RIGHT); STRAIGHT(FOR CAMSHAFT KNOCK); STRAIGHT, NO. 1.

4GRFSE..GSE20
O/S 0.05
EXHAUST VALVE GUIDE; INTAKE VALVE GUIDE; INTAKE VALVE GUIDE, NO. 2.

4GRFSE..GSE20
STD
EXHAUST VALVE GUIDE; INTAKE VALVE GUIDE; INTAKE VALVE GUIDE, NO. 2.

4GRFSE..GSE20
O/S 0.05
EXHAUST VALVE GUIDE; INTAKE VALVE GUIDE; INTAKE VALVE GUIDE, NO. 2.

4GRFSE..GSE20
STD
EXHAUST VALVE GUIDE; INTAKE VALVE GUIDE; INTAKE VALVE GUIDE, NO. 2.

2GRFSE,4GRFSE..GSE2#
O/S 0.05

2GRFSE,4GRFSE..GSE2#
STD

2GRFSE,4GRFSE..GSE2#
O/S 0.05

2GRFSE,4GRFSE..GSE2#
STD

4GRFSE..GSE20
STD

4GRFSE..GSE20
O/S 0.03

4GRFSE..GSE20
STD

4GRFSE..GSE20
O/S 0.03

4GRFSE..GSE20
STD

4GRFSE..GSE20
O/S 0.03

4GRFSE..GSE20
STD

4GRFSE..GSE20
O/S 0.03

2GRFSE,4GRFSE..GSE2#
FOR CAMSHAFT BEARING CAP TO HOUSING; FOR CAMSHAFT BEARING CAP TO HOUSING LEFT, NO. 1; FOR CAMSHAFT BEARING CAP TO HOUSING RIGHT, NO. 1.

2GRFSE,4GRFSE..GSE2#
FOR CAMSHAFT BEARING CAP TO HOUSING LEFT, NO. 2; FOR CAMSHAFT BEARING CAP TO HOUSING RIGHT, NO. 2.

2GRFSE,4GRFSE..GSE2#
FOR CAMSHAFT BEARING CAP TO HOUSING; FOR CAMSHAFT BEARING CAP TO HOUSING LEFT, NO. 1; FOR CAMSHAFT BEARING CAP TO HOUSING RIGHT, NO. 1.

2GRFSE,4GRFSE..GSE2#
FOR CAMSHAFT BEARING CAP TO HOUSING LEFT, NO. 2; FOR CAMSHAFT BEARING CAP TO HOUSING RIGHT, NO. 2.

2GRFSE,4GRFSE..GSE2#
RING; RING (FOR CONTROL SHAFT COVER SET BOLT); RING (FOR TIMING BELT COVER SET); RING NO. 2; RING WITH HEAD; RING(FOR CAMSHAFT BEARING CAP SETTING LEFT); RING(FOR CAMSHAFT BEARING CAP SETTING RIGHT); RING(FOR CAMSHAFT BEARING CAP SETTING); RING(FOR CHAIN CACE); RING(FOR CYLINDER BLOCK NO. 2); RING(FOR CYLINDER BLOCK NO. 3); RING(FOR CYLINDER BLOCK NO. 4); RING(FOR CYLINDER BLOCK NO. 5); RING(FOR EXTENSION HOUSING); RING(FOR MANUAL TRANSMISSION CASE); RING(FOR OIL PUMP SET); RING(FOR OIL SEAL RETAINER, NO. 2); RING(FOR TIMING BELT IDLER BRACKET SET); RING(FOR TRANSMISSION CASE); RING(FOR WATER PUMP SET); SHIFT LEVER RETAINER RING; STRAIGHT(FOR ENGINE REAR OIL SEAL); STRAIGHT(FOR OIL PUMP SET); STRAIGHT(FOR TIMING CHAIN COVER); STRAIGHT(FOR TIMING GEAR COVER SET); STRAIGHT, NO. 1.

2GRFSE,4GRFSE..GSE2#
CAMSHAFT BEARING CAP OIL HOLE, LEFT; CAMSHAFT BEARING CAP OIL HOLE, RIGHT.

2GRFSE,4GRFSE..GSE2#
CAMSHAFT BEARING CAP OIL HOLE, LEFT; CAMSHAFT BEARING CAP OIL HOLE, RIGHT.

2GRFSE,4GRFSE..GSE2#

2GRFSE,4GRFSE..GSE2#

2GRFSE,4GRFSE..GSE2#

2GRFSE,4GRFSE..GSE2#
SEAL(FOR CYLINDER HEAD COVER); SEAL(FOR CYLINDER HEAD COVER, LEFT).

2GRFSE,4GRFSE..GSE2#

2GRFSE,4GRFSE..GSE2#
SEAL(FOR CYLINDER HEAD COVER); SEAL(FOR CYLINDER HEAD COVER, LEFT).

4GRFSE..GSE20

2GRFSE,4GRFSE..GSE2#

2GRFSE,4GRFSE..GSE2#

2GRFSE,4GRFSE..GSE2#
INTAKE AIR SURGE TANK, NO. 2; V-BANK COVER; V-BANK COVER, NO. 1; V-BANK COVER, NO. 3.

4GRFSE..GSE20

2GRFSE,4GRFSE..GSE2#

2GRFSE,4GRFSE..GSE2#
CAM POSITION; CAMSHAFT POSITION; CRANK POSITION; CRANK POSITION, NO. 3.

4GRFSE..GSE20
2GRFSE..GSE21

4GRFSE..GSE20
2GRFSE..GSE21

2GRFSE,4GRFSE..GSE2#

4GRFSE..GSE20
2GRFSE..GSE21

2GRFSE,4GRFSE..GSE2#

2GRFSE,4GRFSE..GSE2#
CAM TIMING OIL CONTROL, LEFT; CAM TIMING OIL CONTROL, RIGHT.

2GRFSE,4GRFSE..GSE2#
NO.2
CAM TIMING OIL CONTROL, LEFT; CAMSHAFT TIMING OIL CONTROL.

2GRFSE,4GRFSE..GSE2#
NO.1
CAM TIMING OIL CONTROL, LEFT; CAM TIMING OIL CONTROL, RIGHT.

2GRFSE,4GRFSE..GSE2#

2GRFSE,4GRFSE..GSE2#
OIL CONTROL VALVE; OIL CONTROL VALVE, LEFT; OIL CONTROL VALVE, RIGHT.

2GRFSE,4GRFSE..GSE2#
OIL CONTROL VALVE; OIL CONTROL VALVE, LEFT; OIL CONTROL VALVE, RIGHT.

STUD(FOR EGR VALVE); STUD(FOR EXHAUST MANIFOLD TO CYLINDER HEAD); STUD(FOR EXHAUST MANIFOLD, RIGHT); STUD(FOR INTAKE MANIFOLD TO CYLINDER HEAD); STUD(FOR MANIFOLD TO CYLINDER HEAD); STUD(FOR OIL PAN); STUD(FOR OIL STRAINER).